en
en

GODIAG GD101 J2534 Passthru Diagnostic

Professional vehicle diagnostic tool

€29.00

⚙️ Dual Mode Support

The GD101 stands out because it combines two functional modes in a single hardware interface and automatically switches between them depending on the software query:

  1. J2534 Passthru Mode: For dealership-level diagnostics and OEM flashing/reprogramming.

  2. ELM327 Mode (Command Set v1.3a): For standard OBD2 diagnostics, reading generic codes, and specialized tweaking tools.

💻 Supported OEM & Third-Party Software

The device is widely compatible with major factory-level diagnostic and tuning packages, including:

  • VAG ODIS: For Volkswagen, Audi, Seat, and Škoda diagnostics.

  • Toyota Techstream (TIS): For Toyota and Lexus diagnostics.

  • Honda HDS: For Honda and Acura modules.

  • JLR SDD: For older Jaguar and Land Rover models (e.g., L316, L319, L320, L322).

  • Forscan & ELMConfig: Excellent for deep diagnostics and configuration on Ford and Mazda vehicles.

  • PCM-Flash: Commonly used for reading/writing ECU maps on the bench or via OBD.

  • Renault Clip / Mitsubishi MUT-III / ScanMaster / GM GDS2 (Note: For GM, it only supports GDS2 software).

🔧 Hardware & Protocol Capabilities

  • Pin Configuration: * High-Speed CAN on pins 6 and 14 (up to 1000Kbps).

    • K-Line/L-Line on pins 7 and 15 (ISO9141 / ISO14230).

    • J1850 PWM (pins 2/10) and J1850 VPW (pin 2).

  • Programming Voltage: Supports programming voltage input up to 20V (on pins 12 or 13), which is essential for flashing older ECUs that require a high-voltage pulse to open the bootloader.

  • Host Connection: High-speed USB 2.0 interface to PC (compatible with Windows 8, 10, and 11, both 32 and 64-bit).